1MRK 505 288-UEN A
15.2.9
15.3
15.3.1
15.3.2
15.3.2.1
15.3.2.2
Table 386:
SETGRPS Non group settings (basic)
Name
Values (Range)
ActiveSetGrp
MaxNoSetGrp
Technical manual
Synchronization via IEC60870-5-103
The IEC60870-5-103 communication can be the source for the coarse time
synchronization, while the fine tuning of the time synchronization needs a source with
higher accuracy. See the communication protocol manual for a detailed description of
the IEC60870-5-103 protocol.
Technical data
Table 385:
Time synchronization, time tagging
Function
Time tagging resolution, events and sampled measurement values
Time tagging error with synchronization once/min (minute pulse
synchronization), events and sampled measurement values
Time tagging error with SNTP synchronization, sampled measurement
values
Parameter setting group handling
Functionality
Use the four different groups of settings to optimize the IED operation for different
power system conditions. Creating and switching between fine-tuned setting sets,
either from the local HMI or configurable binary inputs, results in a highly adaptable
IED that can be applied to a variety of power system scenarios.
Setting group handling SETGRPS
Identification
Function description
Setting group handling
Settings
Unit
SettingGroup1
-
SettingGroup2
SettingGroup3
SettingGroup4
1 - 4
-
IEC 61850
identification
SETGRPS
Step
Default
-
SettingGroup1
1
1
Section 15
Basic IED functions
Value
1 ms
± 1.0 ms typically
± 1.0 ms typically
IEC 60617
ANSI/IEEE C37.2
identification
device number
-
-
Description
ActiveSettingGroup
Max number of setting groups 1-4
469