Authority Management Authman; Identification; Authman; Settings - ABB Relion 650 Series REB650 Technical Manual

1MRK 505 288-UEN A
15.13
15.13.1
15.13.2
15.13.3
Table 410: AUTHMAN Non group settings (basic)
Name Values (Range)
MaintMenuEnable
AuthTimeout
Technical manual
comes to password, upon pressing the
"✳✳✳✳✳✳✳✳". The user must scroll for every letter in the password. After all the
letters are introduced (passwords are case sensitive) choose OK and press the
again.
At successful Log on, the local HMI shows the new user name in the status bar at the
bottom of the LCD. If the Log on is OK, when required to change for example a
password protected setting, the local HMI returns to the actual setting folder. If the
Log on has failed, an "Error Access Denied" message opens. If a user enters an
incorrect password three times, that user will be blocked for ten minutes before a new
attempt to log in can be performed. The user will be blocked from logging in, both
from the local HMI and PCM600. However, other users are to log in during this
period.

Authority management AUTHMAN

Identification

Function description
Authority management

AUTHMAN

This function enables/disables the maintenance menu. It also controls the
maintenance menu log on time out.

Settings

Unit
No -
Yes
10 Min -
20 Min
30 Min
40 Min
50 Min
60 Min
key, the following characters will show up:
IEC 61850
identification
AUTHMAN
Step Default
- Yes
- 10 Min
Section 15
Basic IED functions
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
Description
Maintenance menu enabled
Authority blocking timeout
key
491