Operation Principle - ABB Relion 650 Series REB650 Technical Manual

1MRK 505 288-UEN A
12.11.7
12.12
12.12.1
Technical manual
Name Type
OUT7 GROUP
SIGNAL
OUT8 GROUP
SIGNAL
OUT9 GROUP
SIGNAL
OUT10 GROUP
SIGNAL
OUT11 GROUP
SIGNAL
OUT12 GROUP
SIGNAL
OUT13 GROUP
SIGNAL
OUT14 GROUP
SIGNAL
OUT15 GROUP
SIGNAL
OUT16 GROUP
SIGNAL
OUTOR GROUP
SIGNAL

Operation principle

Upon receiving signals at its inputs, IEC 61850 generic communication I/O functions
16 inputs (SP16GGIO) function will send the signals over IEC 61850-8-1 to the
equipment or system that requests this signals. To be able to get the signal, one must
use other tools, described in the Engineering manual and define which function block
in which equipment or system should receive this information.
There are also 16 output signals that show the input status for each input as well as an
OR type output combined for all 16 input signals. These output signals are handled in
PST.
IEC 61850 generic communication I/O functions
MVGGIO
Identification
Function description
IEC61850 generic communication I/O
functions
Values (Range) Unit
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
IEC 61850 IEC 60617
identification identification
MVGGIO -
Section 12
Monitoring
Description
Output 7 status
Output 8 status
Output 9 status
Output 10 status
Output 11 status
Output 12 status
Output 13 status
Output 14 status
Output 15 status
Output 16 status
Output status logic OR
gate for input 1 to 16
ANSI/IEEE C37.2
device number
-
387