3-3. Replacing the External Connectors/Switches
3-3. Replacing the External
Connectors/Switches
3-3-1. AUDIO IN, AUDIO OUT (CH1,
CH2), DC IN, DC OUT
Connectors
1. Removing the Connector Box
Assembly
(1) Remove the outside panel.
(2) Open the inside panel.
(3) Disconnect the coaxial cable from the
connector (CN1) on the MB-811 board.
n
If the optional DIF-75 board (BKDW-702) is
installed, disconnect the coaxial cable from
the DIF-75 board and pull the board out first.
And then perform step 3.
(4) Disconnect the harness from the connector
(CN503) on the TC-101 board and remove
the harness through the hole of the board
guide (R3).
3-16
Hole
CN503
TC-101 board
MB-811 board
CN1
Coaxial cable
Board guide (R3)
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P2V1