Stylus Pro 4000 Field Repair Guide
1. Load 17" Enhanced Matte roll paper.
2. From the
Adjustment Wizard
Auto Uni-D Adjustment
Auto Uni-D Adjustment
for the Pro 4000, select the
Printer Component,
Software Item,
Auto Uni-D Adjustment.
1. Click on the
Run
button.
2. The Printer will print out these patterns. It will
take approximately 15 minutes
3. The Printer will read the alignment patterns
automatically (using the Multi Sensor), and
write the appropriate values to the board.
4. Click the
Finish
button.
LCD Display,
Printer Button
4/28/05
Page 139.