Locking The Buttons On The Control Panel (Panel Lock); Logging On To The Scanner From A Computer - Epson ES-C320W User Manual

Administrator Information
2. Enter the necessary information in Current password, User Name, New Password, and Confirm New
Password.
The new password must be 8 to 20 characters long and only contain single-byte alphanumeric characters and
symbols.
Note:
The following provides the default values for the administrator information.
❏ User name: none (blank)
❏ Password: Depends on the label attached to product.
If there is a "PASSWORD" label attached to the back, enter the 8-digit number shown on the label. If there is no
"PASSWORD" label attached, enter the serial number on the label attached to the base of the product for the initial
administrator password.
3. Select OK.
Related Information
"Notes on the Administrator Password" on page 12
&
"How to Run Web Config in a Web Browser" on page 30
&

Locking the Buttons on the Control Panel (Panel Lock)

You can lock the Wi-Fi connect button (
be changed from the control panel.
You can set from the Device Management tab > Control Panel > Panel Lock in Web Config.
Related Information
"How to Run Web Config in a Web Browser" on page 30
&

Logging on to the Scanner from a Computer

When you log in to Web Config as an administrator, you can operate items that are set in the Lock Setting.
1. Enter the scanner's IP address into a browser to run Web Config.
2. Click Administrator Login.
3. Enter the user name and administrator password in User Name and Current password.
4. Click OK.
The locked items and Administrator Logout are displayed when being authenticated.
Click Administrator Logout to log off.
Related Information
"Notes on the Administrator Password" on page 12
&
"How to Run Web Config in a Web Browser" on page 30
&
> >
Administrator Settings
) and the Wi-Fi on/off button (
173
Logging on to the Scanner from a Computer
) on so that network settings cannot