Ppds Emulation; Download Emuls; Safe Mode; Factory Defaults - Lexmark MX61 Series Service Manual

PPDS Emulation

The value of this option determines if a printer can recognize and use the PPDS data stream.
Available options:
•
Deactivate
•
Activate

Download Emuls

This appears only if at least one download emulator (DLE) is installed. The default setting is Disable. All download
emulators (DLEs) are reenabled automatically after two PORs.

Safe Mode

The settings for this menu item are On and Off (default). When enabled, Safe Mode lets the printer operate in
a special limited mode in which it attempts to continue offering as much functionality as possible despite known
issues. For more information about Safe Mode and the Safe Mode print behavior for this model, see
Safe Mode" on page 42.
To change the setting:
1
From the Configuration menu, navigate to Safe Mode.
2
Select On or Off to change the setting.
3
Select Submit.
4
POR the printer.

Factory Defaults

Warning—Potential Damage: This operation cannot be undone.
This setting enables a user to restore all of the printer settings to either the network settings (on network models
only) or to the base printer settings.
To restore Factory Default settings:
1
From the Configuration Menu, navigate to Factory Defaults.
2
Select from the available options:
•
Restore Base—restores all non‑critical base printer NVRAM settings.
•
Restore STD Net—restores all network NVRAM settings.
•
Restore LES (available on the touch screen models only)—restores the factory default values for all
framework, standard applications and eSF configuration by removing all non‑standard applications; and
clears the SE logs.
After this setting is changed, the device automatically performs a POR, and restores the appropriate settings
to their factory default values.
Service menus
225
7016
"Using