Color Trapping; Tray Insert Msg; Panel Menus; Ppds Emulation - Lexmark CS310 Service Manual

Color Trapping

Color Trapping uses an algorithm to compensate for mechanical incorrect registration in the printer. When small black
text or fine black lines are being printed, the printer checks to see if they are being printed on top of a colored
background. If so, then rather than remove the color from beneath the black content, the printer leaves the color
around the edge of the test or line. The hole in the colored region is reduced in size, which prevents the characteristic
white gap that is caused by incorrect registration.
Values include Off and number 1‑5 (the default is 2). Values 1 through 5 indicate the amount of color remaining beneath
the black content. Each setting increments by 1/600 of an inch. The more inaccurate the registration setting, the higher
the setting needs to be adjusted. Selecting Off disables color trapping.

Tray Insert Msg

This setting determines how many seconds the panel will display the Tray Insert message after a user has inserted
a tray into the printer.
The user can choose to disable this setting, or to set the value between 1 to 90 seconds. The default value is 5 seconds.

Panel Menus

The Panel Menus lets the system support person enable or disable the control panel menus. Selecting On (the default)
allows users to chance values for the printer. Off disables the users' access to menus. If a user presses Menu, then they
receive a message that the panel menus are locked. When set to Off, this setting restricts all menu access, even to
menus or items set for PIN access, However, when set to On, all PIN restrictions are restored.
This menu item appears only when the PJL PASSWORD Environment variable is set to 0.

PPDS Emulation

PPDS Emulation activates or deactivates (default) the Personal Printer Data Stream (PPDS) emulation language. This
menu item appears only if the PPDS interpreter is available.

Download emuls

This appears only if at least one download emulator (DLE) is installed. The default setting is Disable. All download
emulators (DLEs) are re‑enabled automatically after two PORs.

Safe Mode

The settings for this menu item are On and Off (default). When enabled, Safe Mode lets the printer operate in a special
limited mode in which it attempts to continue offering as much functionality as possible despite known issues. For more
information about Safe Mode and the Safe Mode print behavior for this model, see
To change the setting:
1
From the Configuration menu, navigate to Safe Mode.
2
Select On or Off to change the setting.
3
Select Submit.
4
POR the printer.
Service menus
186
"Using Safe Mode" on page
5027
34.