To Install A Single G3 Board - Ricoh D014 Service Manual

3. Remove the controller box cover [A] ( x16)
Important! If the Fax Unit (D356) has already been installed, skip Steps 4, 5
and go to Step 6.
4. Disconnect the speaker harness (
5. Remove the FCU and VITS ( x5).

To install a Single G3 Board

1. Attach the CCUIF [A] to the SG3 board [B].
2. Attach the assembled CCUIF/SG3 board to the FCU [C] ( x7).
3. Connect harness [D] to the FCU [C].
SM
CÓPIA NÃO CONTROLADA
x1).
9
CÓPIA NÃO CONTROLADA
Installation
D356