To Install The Double Sg3 Boards; To Complete The Installation - Ricoh D014 Service Manual

Installation

To install the Double SG3 Boards

1. Connect the CCUIF [A] to the SG3 boards [B].
2. Attach the assembled CCUIF/SG3 boards to the FCU [C] ( x9).

To complete the installation

1. Connect the flat cable [A] to the CCUIF and FCU.
2. Attach the clamp [B] as shown.
D356
CÓPIA NÃO CONTROLADA
10
CÓPIA NÃO CONTROLADA
SM