Table of Contents
Advertisement
8. Repeat Step 6 and Step 7 for the cable installation into the remaining
Installing an
The AT-SP10TW1, AT-SP10TW3 and AT-SP10TW7 10G direct attach
cables come in 1m, 3m, and 7m cable lengths respectively. These SFP+
SFP+ Direct
cable modules are ordered and supplied separately from the
Attach Cable
AT-DC2552XS / L3.
Perform the following procedure to install an SFP+ direct attach cable:
1. Remove the dust plug from an SFP+ slot on the switch. See Figure 35.
2. Remove the SFP+ direct attach cable from its shipping container and
3. If you are installing the direct attach cable in a top SFP+ slot, position it
Figure 34. Attaching a Fiber Optic Cable to an SFP+ Transceiver
SFP+ transceivers that are installed.
Figure 35. Removing the Dust Plug from an SFP+ Slot
store the packaging material in a safe location.
with the Allied Telesis label and tab facing up. If you are installing the
direct attach cable in a bottom slot, position the it so that the label and
tab are facing down.
AT-DC2552XS / L3 Enterprise Core Switch Installation Guide
71
Advertisement
Table of Contents
