Got Side Settings; Vnc(R) Server Function Setting; Setting Communication Interface (Communication Settings) - Mitsubishi Electric GOT1000 Series Connection Manual

HINT HINT HINT
System configuration between the GOT and PLC
For the system configuration between the GOT and PLC, refer to each chapter.

11.3 GOT Side Settings

11.3.1

VNC(R) server function setting

2.
1.
Select [Common] [Peripheral Setting]
Server] from the menu.
2.
Check the [VNC Server] of [Use VNC Server] to set.
For details on the settings, refer to the following
manual.
GT Designer3 Version1 Screen Design Manual
(Functions)
3.
Click the [OK] button when settings are completed.
Mitsubishi Electric Products
Non-Mitsubishi Electric Products 1, Non-Mitsubishi Electric Products 2
Microcomputer, MODBUS Products, Peripherals
Click!
[VNC
11.3.2 Setting communication
interface (Communication
settings)
®
For using the VNC server, Ethernet
communication drivers must be set on the GOT,
and set the Communication settings
2.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
11. VNC(R) SERVER CONNECTION

11.3 GOT Side Settings

9
10
11
12
13
3.
4.
14
Click!
15
11 - 3