Replacement Of A Petrol Gauge Tank Unit; Work On The Petrol Tank - CITROËN ID 19 Repair Manual

ID
19
OPERATION No. ID 175- 1 :
Work on the petrol tank
Op. ID 175-1
42 Lift the rear squab and remove. Remove the rear seat.
43
44
45
Removethepetroltank cover plate
. . . . . ..(............................................................
Remove the negative cable from the battery. Disconnect the leads from the tank unit terminals.
Remove the tank unit fixing screws. Remove the tank unit complete with float.
Remove the rubber gasket between
tank unit and petrol tank.
46 Place the rubber gasket of the tank unit on the petrol tank.
47
48
49
Replace the rear seat and squab.
REPLACEMENT OF A PETROL GAUGE TANK UNIT
Removal.
. . .
Refitting.
Introduce the tank unit float into the tank and place the tank unit in position.
Tighten the fixing screws (fibre
washers under heads).
Connect the leads to the tank unit terminals. Close the electric circuit (ignition on) and make sure that the petrol
gauge is functioning.
Fit the petrol tank cover plate.
Tighten the fixing screws (plain washer under head).
Glue the sill trimming on the
cover
(Glutafix T glue, sold by Messrs. Beissier, 125, Rue de Reuilly, Paris
12e).
. .
T
TOOLS
12 mm box spanner
12 mm box spanner