Tools; Technical Information; Work On The Hydraulic Units; Work On The Body, And Underbody Repair - CITROËN ID 19 Repair Manual

TOOLS

The special tools used for repairing the ID 19 are indicated as follows :
1. By a number, suffixed by the letter T. These tools are sold by Établissements FENWICK, 15, rue Fénelon, Paris (10
should not be ordered direct but orders should be passed through the usual channels as for normal spare parts requirements.
2. By a number prefixed by the letters MR which are not supplied by us. The necessary information and dimensions for making
them are shown in this manual.

TECHNICAL INFORMATION

Any enquiries should be addressed to: SERVICE DEPARTMENT, CITROEN CARS UMITED, SLOUGH, BUCKS., ENGLAND.

WORK ON THE HYDRAULIC UNITS

When carrying out work on the hydraulic units, precautions must be taken to ensure conditions of the strictest cleanliness (see Op. ID 00).

WORK ON THE BODY, AND UNDERBODY REPAIR

To preserve the vehicle's roadholding and braking qualities. it is essential to locate correctly components to which mechanical parts are fitted.
This can only be achieved by using a surface plate No. 2600-T, designed by our REPAIR METHODS Department, and sold by FENWICK.
The "ID - DS 19 Bodywork Repair Manual" lists all spares sold by our SPARE PARTS Department.
NOTE.
There are in the trade surface plates which are cheaper and which can be used for repairing cars of different makes. We do not advise the use of these
surface plates as they are not sufficiently sturdy and lack the accuracy required for repairing our vehicles.
In fact, it must be remembered that mechanical components are fitted directly onto Citroen bodies and that the vehicle's qualities (roadholding,
braking. tyre wear) depend essentially on the position of these components.
e
). They