Extracting The Hub Bearings - CITROËN ID 19 Repair Manual

REAR AXLE
ID 19
EXTRACTING THE HUB BEARINGS
75
EXTRACTOR
;,'
,.1'
:'
1. PLACE THE SPLIT RING A, WITHOUT THE SPINDLE B, BEHIND THE RING C
2. PUT THE SPINDLE 6 IN THE SPLIT RING A SO AS TO SPREAD AND LOCATE THEM
3. FIT THE U PIECE D, THE WASHER E, SCREW UP THE NUT F
NOTE: THE SPINDLE IS FITTED FROM THE INSIDE OF THE HUB