Assembly Of The Drive Shaft Dust Cover - CITROËN ID 19 Repair Manual

FRONT AXLE
ID 19
ASSEMBLY OF THE DRIVE SHAFT DUST COVER
a 1 TAPER FITTING FDR POSITIONING DUST COVER
6.._ /
sold under No.1930-T
1st GREASE THE TAPER FITTING
2nd PUT THE DUST COVER 1 ON THE TAPER
AS SHOWN (Fig.1)
3rd GRASP THE DUST COVER By THE LARGE
DIAMETER AT *a*. PULL FIRMLY OVER
THE END l b' .
4th REMOVE THE TAPER FITTING. TURN THE
DUST COVER BACK INTO ITS ORIGINAL
,,"
SHAPE AS SHOWN (Fig.3)
p ,,../. .'--
,..A .,J
Fig. 3