Thrust Washers; Adjusting Washers - CITROËN ID 19 Repair Manual

158 A - 4 OPERATION No. ID 330- 3 : O.z,c~l./rtrr/l;r/;r i, :~r.,ii./~,r.\
ID 19
b)
Fit the 3rd speed loose pinion (40) on the mainshaft, iitt~~cl \~lth its needle bearing cage and the bronze bush
(41), the locking half segments (39) and the bush (38), th(> 2nd speed loose pinion (37) fitted with its needle
bearing cage and the adjusting
shim
(36), the 2nd spcccl synchromesh (34) (see Pl. 44, fig. 1).
IMPORTANT REMARK
Adjustment of the 1st and 2nd speed fork spindle thrust cap.
The adjustment of clearance between the ring(A) controlling the 2nd speed sycro rods and the mainshaft reverse speed pinion (34) is carried ollt
after ptting the gear box on the
car
and after having connected am a&mcri the change speed lever control.
Proceed as follows:
I. Place the
gear selector
lezjer in the 2nd speed position.
2. Screw in the thrust cap, situatetl on the lid in order to make contact zuith the 1st and 2nd speed spindle (96) (see PL47, .fig.
2),
without
lrloving the latter.
3. Then unsrm the cap <', to \
of a
turn, this will represent the ch~arancc (c) to be obtained after assembtv, and tighten the locknut (me the
spanner MR3691-80, see PL. 57,fig.
2).
Schedule I
Schedule II
Thrust washers (206) Adjusting washers (207)
For the reverse speed needle bearing cage. Between needle bearing
I-
Thickness
* 0.01
1.54
2.02
2.50
2.98
3.46
3.94
Spare Part
Num be r
DM 333-80
DM 333-80a
DM 333-80b
DM 333-80~
DM 333-80d
DM 333-80e
Thickness
* 0.01
0.4
0.7
1
1.3
1.6
1.9
2. 2
2. 5
2. 8
3. 1
3.4
3.7
4
cage and locking circlip.
Spare Part
Number
DM 333-74
DM 333-74a
DM 333-74b
DM 333-74~
D,@ 333-74d
Dh 333-74e
DM 333-741
DM 333-74g
DM 333-74h
DM 333-741
DM 333-743
DM 333-74k
Dhl 333-74m
TOOLS