Replacement Of A Locking Ratchet; Replacement Of A Control Cable - CITROËN ID 19 Repair Manual

306 OPERATION No. ID 454- 1 :
Work on the meckanica~ br& cuntroi
ID 19
33 Hold the release trigger (10) against the brake handle.
34 Remove the split pin from the fulcrum pin (17) of the locking ratchet (14).
Remove the fulcrum pin and the springs acting as spacers
between
the ratchet and its support.
35 Pull the brake handle home in the "brake on" position.
Rotate the ratchet half a turn and remove it from the bottom.
Refitting (see Pl. 109).
36 With the brake handle in the "brake on" position, engage the ratchet (14) in the handbrake lever (head of the locking
guide towards the top) and then turn over.
37
Insert the fulcrum pin (17) in the locking ratchet (14) support and put one spacer spring, the ratchet and the second
spacer spring in position. Insert a split pin in the fulcrum pin.
38 Free the release trigger. Check the brake control for correct operation and adjust if necessary (see Op. ID 454-O).
REPLACEMENT OF A CONTROL CABLE
Removal (see Pl. 109 - 110).
39
Remove the spare wheel, the left-hand front wing, the battery, the battery tray and the left-hand protection panel.
40 Get an assistant to set the right-hand brake control lever (2) in the "brake on" position. Remove the sheath socket
from the lever (25) and remove the cable socket from the control lever (26).
41
42
Remove the control cable and sheath assembly from the guide bush on the sidemember.
Remove the split pin (4) from the pin
(5) securing the control cable (3) to the handbrake control lever. Remove the
pin and the cable.
43
44
Unlock the locknut (23) on the threaded sleeve (24) and unscrew the sleeve completely.
Remove the cable, sheath, spring and threaded sleeve assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unscrew the locknut (23) on the threaded sleeve (24) and remove the sleeve from the cable (3).
REPLACEMENT OF A LOCKING RATCHET
Removal (see Pl. 109).
TOOLS
8-12-14 mm spanners and
box spanne r s
21 mm spanner