Image Formation Problems; No Image Appears (Entirely White); No Image Appears (Entirely Black); A Specific Color Is Printed Solid - Kyocera TASKalfa 266ci Service Manual

1-4-3 Image formation problems

If the part causing the problem was not supplied, use the unit including the part for replacement.
(1) No image
appears (entirely
white).
See page 1-4-30
(6) The back-
ground is col-
ored.
See page 1-4-32
(11) The leading
edge of image
begins to print
too early or too
late.
See page 1-4-33
(16)Colors are
printed offset to
each other.
See page 1-4-35
(2) No image (3) A specific color
appears (entirely
black).
See page 1-4-30
(7) White streaks (8) Black streaks
are printed verti-
cally.
See page 1-4-32
(12)Paper is wrin- (13)Offset occurs.
kled.
See page 1-4-33
(4) The back side
is printed solid.
See page 1-4-31 See page 1-4-31
(9) Streaks are
are printed verti-
cally.
See page 1-4-32 See page 1-4-33
(14)Part of image is
See page 1-4-34 See page 1-4-34
1-4-29
(5) Image is too
gets dirty. light.
See page 1-4-31
(10)Spots are
printed horizon-
tally.
See page 1-4-33
(15)Fusing is loose.
missing.
See page 1-4-34
2PZ
printed.