Table of Contents
Advertisement
Figure 221. Add LAN Host to Library Window (TCP/IP Selected)
Fill in the following fields:
Host Alias (optional)
Host IP Address
Host Name
The Add LAN Host to Library window has the following push buttons:
OK
Cancel
Help
Delete LAN Host from Library
In the Delete LAN Host from Library window (Figure 222 on page 345), select the
LAN-attached host to be deleted from the 3494 Tape Library configuration. The
library no longer responds to requests from the deleted host.
344
3494 Tape Library Operator Guide
The alias for a host is a user-supplied nickname for that host. This is an
optional field, and you may leave it blank if you do not want an alias. This
entry field accepts only alphanumeric characters and the ".", "-", and "_"
characters.
The Host IP Address is the unique Internet address assigned to the host.
This field accepts only digits and the ".", "-", and "_" characters. Blank
spaces are not valid. The correct form is xxx.xxx.xxx.xxx where xxx
represents a number from 000–255.
The Host Name is the Hostname defined in the TCP/IP network. This field
accepts only alphanumeric characters and the ".", "-", and "_" characters.
Blank spaces are not valid.
Adds a LAN-attached host to the 3494 Tape Library using the information
in the Add LAN Host to Library window.
Cancels the Add LAN Host operation and closes the Add LAN Host to
Library window without adding a host.
Provides help about the Add LAN Host to Library window.
Advertisement
Table of Contents
