Table of Contents
Advertisement
Figure 222. Delete LAN Host from Library Window
Host Alias (optional)
The alias for a host is a user-supplied nickname for that host. This is an
optional field, and will be blank if there is no alias.
Host Name
This field lists the names of all hosts that are configured with the 3494
Tape Library through LANs.
For TCP/IP hosts, the Host Name is the Hostname defined in the TCP/IP
network. In Figure 222, sim45.tucson.ibm.com is a TCP/IP Hostname.
For APPC and APPC/VTAM hosts, the Host Name is a combination of the
Host Network ID and the Host Location Name. For example, if the Host
Network ID is USIBMSU, and the Host Location Name is S10A4045, then
the Host Name is USIBMSU.S10A4045.
This window displays the host names and (if set up) the host aliases of all the
hosts that are configured with the 3494 Tape Library through a LAN. Select the
host you want to delete, then select the OK push button.
A caution window opens to verify that you really want to delete this host.
Selecting the Yes push button on this window deletes the host from the 3494 Tape
Library.
The Delete LAN Host from Library window has the following push buttons:
OK
Deletes the selected host from the 3494 Tape Library.
Cancel
Cancels the Delete LAN Host operation and closes the Delete LAN Host
from Library window without deleting a host.
Help
Provides help about the Delete LAN Host from Library window.
Chapter 6. Advanced Operating Procedures
345
Advertisement
Table of Contents
