Using The Commands Menu - IBM TotalStorage 3494 Tape Library Operator's Manual

This window can be used to force the Library Manager to perform this database
maintenance on a specific day and time of day (for the weekly maintenance) and
at a specific time of day (for the daily maintenance).
Note: You can disable daily maintenance, which will keep it from executing, by
Figure 133. Database Maintenance Schedule Window
Scheduled database maintenance consists of:
Weekly Maintenance
Daily Maintenance
The Database Maintenance - Schedule window has the following push buttons:
Save
Exit
Help

Using the Commands Menu

Use the Commands menu (Figure 134 on page 223) to work with 3494 Tape Library
commands.
222
3494 Tape Library Operator Guide
unchecking the Enable Daily Maintenance checkbox. This will apply
regardless of whether the maintenance is automatic or scheduled. If daily
maintenance is disabled, then only the scheduled or automatic weekly
maintenance will execute. When changing the schedule, please be aware that
hour=00 and min=00 is a valid time (midnight).
Drop and recreate the database indices for the cartridge table.
Run database statistics on the cartridge table.
Saves the database maintenance schedule and closes the window.
Closes the window. No change is made to the database maintenance
schedule.
Provides help about the Database Maintenance - Schedule window.