Table of Contents
Advertisement
Figure 176. Manage Logical Volumes Window
The Manage Logical Volumes window has the following push buttons:
Perform action
Initiates the Insert Logical Volumes operation or Change Existing Logical
Volumes operation. The number of volumes that are to be inserted is
displayed for you to confirm. Select Yes to proceed with the Insert
operation or No to cancel the Insert operation.
A check is made to ensure that the total number of logical volumes for the
3494 Tape Library does not exceed the maximum allowable number. If the
Insert operation would result in more than the maximum allowable
number of logical volumes in the 3494 Tape Library, an error message is
displayed, and the Insert operation is canceled.
When multiple VTSs are in the 3494 Tape Library, logical volumes may be
assigned to each VTS in any quantity, providing that the total for all logical
volumes does not exceed the maximum allowable for the 3494 Tape
Library.
During the Insert operation, the line status indicates the progress of the
Insert operation.
Cancel action
Closes the Manage Logical Volumes window.
Refresh
Refreshes the Manage Logical Volumes window.
History
Displays previous requests to Manage Logical Volumes. The requests are
displayed in a separate screen:
Chapter 6. Advanced Operating Procedures
281
Advertisement
Table of Contents
