Table of Contents
Advertisement
Table 52. Export Status Messages (continued)
Message Code
Message Text
E0011
EXPORT PROCESSING TERMINATED WAITING FOR HOST RESPONSE
This message is generated when the VTS has ended the Export operation because host processing
of the logical volumes in the Exported category has been inactive for 60 continuous minutes.
Action: Perform analysis of the Status File on the Export List Volume and reissue the Export
operation.
E0012
FRAGMENTS FOR STACKED VOLUME XXXXXX NOT DELETED
There has been a VTS failure to delete successfully all of the fragments for logical volumes that
were otherwise exported successfully.
Action: Call your service representative.
E0013
EXPORT PROCESSING SUSPENDED, WAITING FOR SCRATCH VOLUME
This message is generated every five minutes when the VTS needs a scratch stacked volume to
continue Export operation, and there are none available.
Action: None, status only.
E0014
EXPORT PROCESSING RESUMED, SCRATCH VOLUME MADE AVAILABLE
This message is generated when, after the Export operation was suspended because no scratch
stacked volumes were available, scratch stacked volumes are again available, and the Export
operation can continue.
Action: None, status only.
E0015
EXPORT PROCESSING TERMINATED, WAITING FOR SCRATCH VOLUME
This message is generated when the VTS has ended the Export operation because scratch stacked
volumes were not made available to the VTS within 60 minutes of the VTS readiness to copy
logical volumes to an Exported Stacked Volume.
Action: You should make more VTS stacked volumes available, perform analysis of the Status
File on the Export List Volume, and reissue the Export operation.
E0016
COPYING LOGICAL EXPORT VOLUMES FROM CACHE TO STACKED VOLUMES
This message is generated when the VTS starts, and every ten minutes during, the process of
copying or fragmenting logical volumes that are still in the tape volume cache and must be on a
stacked volume before proceeding to copy them to an Exported Stacked Volume.
Action: None, status only.
E0017
COMPLETED COPY OF LOGICAL EXPORT VOLUMES TO STACKED VOLUMES
This message is generated when the VTS has completed the copy of logical volumes to VTS
stacked volumes, allowing the continuing process of copying to the Exported Stacked Volumes.
Action: None, status only.
E0018
EXPORT TERMINATED, EXCESSIVE TIME FOR COPY TO STACKED VOLUMES
The Export operation has been ended because the logical volumes could not be copied to VTS
stacked volumes or fragmented within ten hours from the start of the Export operation.
Action: Perform analysis of the Status File on the Export List Volume and reissue the Export
operation.
E0019
Reserved
E0020
Reserved
538
3494 Tape Library Operator Guide
Advertisement
Table of Contents
