IBM TotalStorage 3494 Tape Library Operator's Manual page 401

1. OF - indicating "All Convenience Output Stations Full"
2. —
Param E
It is one of the following:
1. II - indicating "3494 I/O Station in Input Mode"
2. —
Param F
It is one of the following:
1. BA - indicating "Bulk I/O Allowed"
2. —
Param G
It is one of the following:
1. BF - indicating "Bulk Output Station Full"
2. —
Param H
It is one of the following:
1. OO - indicating "Open Output Door"
2. —
Example:
3494 C2444 UNSOL 12 IE IO - - II - BF - *I/O Station
Operational State Change SNMP Traps:
The Operational State Change message format is:
3494 [Library Sequence Number] UNSOL 13 [Mode] [State] [Degraded] [Safety
Enclosure Interlock Open] [Vision System Non-Operational] [Intervention
Required] [Check1] [All Storage Cells Full] [Out of Cleaners] [Dual Write
Disabled] [Smoke Detected] [Manual Mode] *Operational State Change
Library Sequence Number
Unique Library Sequence Number of the 3494 that generated the SNMP
trap message.
Mode The mode is one of the following:
v Auto
v Pause
v Manual
State The state is one of the following:
v Online
v Offline
Degraded
It is one of the following:
v —
v Degrad
Safety Enclosure Interlock Open
It is one of the following:
v —
v SO
Chapter 6. Advanced Operating Procedures
375