IBM TotalStorage 3494 Tape Library Operator's Manual page 510

Table of Contents

Advertisement

Table 28. Intervention-Required Conditions (continued)
Intervention-Required Condition
Message
Database restore from volume xxxxxx failed, attempting
restore from next most recent. (VTS z)
Probable Cause
During the disaster recovery process, VTS z could not
recover the database from stacked volume xxxxxx
successfully. Error recovery was unsuccessful. The media
may have been damaged during the disaster.
Message
Insert of logical volume xxxxxx failed during disaster
recovery. (VTS z)
Probable Cause
During the disaster recovery process, logical volume
xxxxxx could not be added to the Library Manager
inventory. The cause may be one of the following:
v The volser is already in the inventory.
v The library is already at the logical volume limit.
v The volser conflicts with a physical volume's volser
that is already in the 3494 Tape Library.
Message
Damaged volume xxxxxx ejected during disaster
recovery. Could not be read on 2 drives. (VTS z)
Probable Cause
During the disaster recovery process, VTS z could not
read the recovery information on stacked volume xxxxxx.
Error recovery was unsuccessful. The media may have
been damaged during the disaster. The cartridge is
placed in the convenience I/O station.
Message
Device xxx has been made unavailable by a VTS. (VTS
z)
Probable Cause
During an operation with device xxx, the VTS controller
determined that the device is not operating correctly and
requires service. It is likely that the device has excessive
read or write errors.
484
3494 Tape Library Operator Guide
Resolution Actions
Notify your system administrator.
OP0109
Notify your system administrator.
OP0110
1. Remove the cartridges from the I/O station.
OP0111
2. If possible, repair the cartridge and place in the
convenience I/O station.
Call your service representative.
OP0112

Advertisement

Table of Contents
loading

Table of Contents