Table of Contents
Advertisement
Table 51. Status Codes and Status Text (continued)
Operation Status
Status Code
08
Status Text
Exported Stacked Volume not in Import
category
Probable Cause
Processing for the Exported Stacked Volume not
allowed. The Exported Stacked Volume
specified in the Import List is in the library but
is not assigned to the Import category.
Status Code
09
Status Text
Logical volume in-use
Probable Cause
The logical volume could not be exported
because the volume specified in the Export List
was mounted or queued to be mounted when
the list was processed as part of the Export
operation.
Status Code
10
Status Text
Terminated by library error
Probable Cause
The volume could not be exported or imported
because the Library Manager detected an
unrecoverable (Check-1) error before processing
the volume, which ended the operation.
Status Code
11
Status Text
Terminated by VTS error XXXX
Probable Cause
The volume could not be exported or imported
because the VTS detected an unrecoverable
error before processing the volume, which
ended the operation.
526
3494 Tape Library Operator Guide
Resolution Actions
1. Use the tape management system or TCDB to check
that the specified volume is an Exported Stacked
Volume.
2. If the volume is an Exported Stacked Volume and is
in the Unassigned category, move the volume to the
Import category.
3. If the Exported Stacked Volume is found in the Insert
category, the volume must be moved to the Eject
category and when ejected, it must be reinserted into
the convenience I/O station and moved into the
Import category.
4. Retry the Import operation.
5. If the volume is not found to be an Exported Stacked
Volume, check the source for the Import List Volume
contents.
Retry the export of the volume when it is no longer
being used.
Call your service representative.
Call your service representative. Error XXXX indicates the
functional area within the VTS that encountered the
unrecoverable error.
Advertisement
Table of Contents
