Table of Contents
Advertisement
Figure 226. Change LAN Host Information Window (TCP/IP)
Host Alias (optional)
Host IP Address
Host Name
Note: If the host is an AS/400 or iSeries, the following commands provide the
The Change LAN Host Information window has the following push buttons:
OK
The alias for a host is a user-supplied nickname for that host. This is an
optional field, and you may leave it blank if you do not want an alias. This
entry field accepts only alphanumeric characters and the ".", "-", and "_"
characters.
The Host IP Address is the unique Internet address assigned to the host.
This field accepts only digits and the ".", "-", and "_" characters. Blank
spaces are not valid. The correct form is dotted decimal notation
(xxx.xxx.xxx.xxx where xxx represents a number from 000–255).
The Host Name is the Hostname defined in the TCP/IP network. This field
accepts only alphanumeric characters and the ".", "-", and "_" characters.
Blank spaces are not valid.
information that you need to update the Change LAN Host Information
window:
v If the AS/400 or iSeries operating system is earlier than Version 3 Release
6, use DSPLANMLD (the Display LAN Information command).
v If the AS/400 or iSeries operating system is Version 3 Release 6 or later,
use DSPLANMLB (the Display LAN Media Library Information
command).
Updates the LAN host information by using the changes entered in the
Change LAN Host Information window.
Chapter 6. Advanced Operating Procedures
351
Advertisement
Table of Contents
