Migrating From A Ficon Bridge To A Native Ficon Attachment On Zseries Hosts: Native Ficon Configuration; Example Of How To Add A Ficon Director And A Ficon Host Adapter - IBM TotalStorage DS6000 Attachment Manual
Host systems attachment guide
Hide thumbs
Also See for TotalStorage DS6000:
- Redbook (578 pages) ,
- Redbooks (406 pages) ,
- Introduction and planning manual (119 pages)
Table of Contents
Advertisement
Figure 44. Example of how to add a FICON director and a FICON host adapter
Migrating from a FICON bridge to a native FICON attachment on
zSeries hosts: Native FICON configuration
This section provides a native FICON configuration example.
Figure 45 on page 92 shows an S/390 or zSeries host system with two FICON
channels connected to two FICON directors through a channel-path group to two
FICON adapters. Note that the second bridge has been removed and a FICON
director has been added. The channel-path group has only the FICON paths.
S/390 or
zSeries Host
1 1
6
5
5
a storage unit
Chapter 10. Attaching to an IBM S/390 or IBM eServer zSeries host
3
2
4
91
Advertisement
Table of Contents
