Table of Contents
Advertisement
Figure 195. LME: Key Label Entry and EKM IP Information
Adding and Deleting Key Labels
The top half of the window is for Key Label entry. The Key Labels that have
already been added are displayed in alphabetical order. Key Labels are stored in
lower case only. A maximum of 64 Key Labels can be entered. Each Key Label has
a minimum length of one byte and a maximum length of 64 bytes. Any characters
may be used, even imbedded blanks.
To add a key label, enter a new key label in the Key Label field, then select Add
Key Label.
To delete a key label, select the key label in the Key Label Entry list, then select
Delete.
Note: A key label cannot be deleted if it is currently associated with a Barcode
Entering EKM IP Addresses
The bottom half of the window is used for adding or updating the LME Key
Manager IP addresses and ports. The IP address must be entered as an IPv4
address. The port number is a decimal number between 0 and 65535. Every
application that uses TCP/IP requires a port number. The IP address of the
application is used in conjunction with the port number to access the Key Manager
application.
To add or change an EKM IP address:
310
3494 Tape Library Operator Guide
Manage Encryption, then select Key Label Entry / EKM IP Info from the
menu. (See"Specialist Features and Functions" on page 396.)
Encryption Policy or if re-KEKing is in progress.
Advertisement
Table of Contents
