Table of Contents
Advertisement
Complete the cartridge information, then press the Enter key.
Volser of Cartridge. . . WCC001
Cartridge type . . . . . _1. Cartridge System Tape
+---------------------------------------------------------------------+
| Put the cartridge in the indicated home cell, press the Enter key. |
| If you cannot use the home cell, press the Error key (F4) to have a |
| different cell specified.
|
| Home Cell . . . Rack 1 B 10
|
|
| F1=Help F4=Error F12=Cancel
+---------------------------------------------------------------------+
F1=Help F3=HideScreen F12=Cancel
Figure 243. Manual Mode Insert Cartridges Window
The following function keys are available in the Manual Mode Insert Cartridges
window:
F1
F4
F12
Enter
Note: When you return to the Manual mode Action List (Figure 242 on page 387),
Ejecting Cartridges
Perform the following steps to remove a cartridge from the 3494 Tape Library:
1. From the Action List window (Figure 242 on page 387), determine the drive
2. Go to the drive or storage cell and remove the cartridge. Verify that the
392
3494 Tape Library Operator Guide
Insert Cartridges
_E. Enhanced Capacity Cartridge System Tape
_J. High Performance Cartridge Tape
_K. Extended High Performance Cartridge Tape
_A. Enterprise Tape Cartridge
Provides help about the Manual Mode Insert Cartridges window.
Allows you to specify another home-cell location because you cannot insert
the cartridge in the specified location.
Closes the window and returns to the Manual Mode Insert Cartridges
window.
Sends confirmation to the host program, which verifies that the cartridge is
inserted in the specified location. Also, opens the Manual Mode Insert
Cartridges window for the next Insert operation.
if you inserted J- or K-type media in a 3494 Tape Library capable of Export
and Import operations, the Manage Unassigned Volumes window
(Figure 150 on page 250) opens automatically.
(device) or storage cell From location containing the cartridge that you want to
eject.
cartridge volser matches the volser specified on the Action List.
Note:
a. If the From location is a tape drive, remove the cartridge from the
tape drive.
b. If a ? follows the From location, the cartridge has already been used
in Manual mode. If the cartridge is not present in the indicated From
location, look in the location where you are storing demounted
cartridges (for example, the high-capacity output area).
|
|
|
|
|
|
Advertisement
Table of Contents
