Table of Contents
Advertisement
Current password
New password
Verify Specifies reentry of the new password.
The System Administrator Password window has the following push buttons:
OK
Cancel
Help
If you enter the current password correctly, you can access the function.
Note: Do not forget the system administrator password. If this is the first time this
You can change the password by entering a new password into the New password
and Verify fields after entering the current password. If the current password is
correct and the two new password fields match, you have access to the protected
functions, and the password is changed. Changing the system administrator
password on one protected menu changes the password to all protected menus,
except for the Service menu. If Service mode is active, these functions do not
require the system administrator password.
Service Access
Enable service access
Disable service access
SNMP Options
The 3494 Tape Library can attach to many different host systems, with various
operating systems that communicate with the 3494 Tape Library using different
types of connections. During operation, the 3494 Tape Library may encounter
situations that you would want to know about, such as a door being opened
(which causes the 3494 Tape Library to stop). Because there are many different
attachment methods, the 3494 Tape Library provides a standard TCP/IP protocol
called Simple Network Management Protocol (SNMP) to send alerts (called SNMP
traps) over a TCP/IP LAN network to one or more SNMP monitoring stations.
These monitoring stations, along with other user-supplied software, can alert
operations staff to possible problems or operator interventions that occur at the
3494 Tape Library. Figure 230 on page 357 shows a basic SNMP block diagram.
356
3494 Tape Library Operator Guide
Specifies entry of the current password.
Specifies entry of the new password.
Updates the password to the new password.
Closes the System Administrator Password window without changing the
password.
Provides help about the System Administrator Password window.
window opens, the Current password is the only entry required. This entry
becomes the system administrator password for all protected functions. If
you cannot remember the password, call your service representative.
This option provides the ability to access the Library Managers through a
modem connection, if installed. This also allows service personnel to
off-load files (log and dump) from the Library Manager. The Library
Manager may prompt you for the system administrator password.
This option prevents the ability to access the Library Manager through a
modem connection, if installed. The Library Manager may prompt you for
the system administrator password.
Advertisement
Table of Contents
