Table of Contents
Advertisement
Note: You can also maintain EKM data from the 3494 Tape Library Specialist.
For each encryption-capable control unit, the following information is displayed in
at the top of the panel:
v The 3494 frame number or the 3953 subsystem number.
v The IP address of the Primary Name Server.
v The IP address of the Secondary Name Server.
v The IP address or domain name of the Primary Key Manager.
v The Port Number for the Primary Key Manager.
v The IP address or domain name of the Secondary Key Manager.
v The Port Number for the Secondary Key Manager.
Note: For IP addresses and domain names that are too long to display in the list
Note: If a control unit is encryption-capable but the System Administrator has not
The following actions can be performed:
v Add or modify the name server address for the primary and secondary key
v Add or modify the IP address or domain name, and port for the primary and
v Monitor the status of the key managers.
Figure 194. Control Unit Encryption Information Window
308
3494 Tape Library Operator Guide
Select Administer Library Manager, Manage Encryption, then select Control
Unit Encryption Information from the menu. (See"Specialist Features and
Functions" on page 396.)
box a plus sign (+) is appended to show that there is truncated data. If you
highlight a control unit in the list box, the entire data will be displayed in
the entry fields in the bottom half of the panel.
yet entered the encryption data (via this panel) then the message "No Data"
is displayed after the frame/subsystem number.
managers.
secondary key managers.
Advertisement
Table of Contents
