Accessor Mounts Per Hour; Ve / Vts Status - IBM TotalStorage 3494 Tape Library Operator's Manual

Accessor Mounts Per Hour

Note: You can view accessor mounts per hour from the Specialist (see "Specialist
Features and Functions" on page 396).
The Accessor Mounts per Hour window (Figure 96) displays a graph showing the
number of mounts per hour for each accessor. Data is displayed for the previous
24 hours. An asterisk (*) for Accessor A and a diamond (♦) for Accessor B
designate the current hour's data.
Figure 96. Accessor Mounts Per Hour Window
The Accessor Mounts per Hour window has the following available on its menu
bar:
Refresh
Refreshes or updates the contents of the window immediately. You can also
click the pointing device in the client area of the window.
Help Provides help about the Accessor Mounts per Hour window.
To close the Accessor Mounts per Hour window, select the Close option on the
System Menu icon (upper-left corner of the window).

VE / VTS Status

The VTS Status window (Figure 97 on page 168 or Figure 98 on page 169) displays
information about the status of each individual VTS or TS7700 Virtualization
Engine installed in the 3494 Tape Library.
Notes:
Chapter 6. Advanced Operating Procedures
167