Table of Contents
Advertisement
v Failed indicates that all the grippers have failed.
Vision shows the status of the vision system:
v OK indicates that the vision system is functional.
v Failed indicates that the vision system failed.
If the 3494 HA1 Option is installed, Vision shows the status of the vision system
on both cartridge accessors:
v OK indicates that both vision systems are functional.
v Degraded indicates that one of the vision systems has failed.
v Failed indicates that all vision systems have failed.
Power shows the status of power for the cartridge accessor:
v OK indicates that power is enabled to the cartridge accessor.
v Power is Off indicates that power is disabled to the cartridge accessor.
If the 3494 HA1 Option is installed, the Power shows the status of power for both
cartridge accessors:
v OK indicates that power is enabled to both cartridge accessors.
v Power is off indicates that power is disabled to both cartridge accessors.
v Degraded indicates that power is disabled on one of the cartridge accessors.
This is OK if power was turned off to one accessor and the system has not yet
transitioned to Auto mode.
Port shows the status of the communication port between the cartridge accessor
controller and the Library Manager:
v OK indicates that communication on this port is established and is active.
v Not initialized indicates that communication on this port is not established or is
lost.
v Not installed indicates that installation is not complete.
If the 3494 HA1 Option is installed, the port status shows the status for both
cartridge accessors:
v OK indicates that communication on this port is established and is active for
both cartridge accessors.
v Not initialized indicates that communication on this port is not established or is
lost for both cartridge accessors.
v Degraded indicates that communication on this port is established and is active
for one of the cartridge accessors.
Convenience I/O shows the state of the convenience I/O station. It indicates Not
installed, Not available, Empty, Volumes present, Opened, or Unknown.
Convenience I/O Mode shows the mode setting for the convenience I/O station:
v Insert indicates that the convenience I/O station is in Insert mode.
v Import indicates that the convenience I/O station is in Import mode (you can
disable Export/Import capability by using a service Utilities window option).
v Unknown indicates that the convenience I/O station mode is unknown.
v Blank indicates that the convenience I/O station is not installed.
High capacity shows the status of the high-capacity facility:
Chapter 6. Advanced Operating Procedures
183
Advertisement
Table of Contents
