IBM TotalStorage 3494 Tape Library Operator's Manual page 236

Mounted
Inaccessible
Manual mode
Expire time
Up to five output columns can be selected to include in the output list. The data is
sorted by the first two output columns. The first column takes precedence over the
second column.
The amount of data contained in the list can be decreased by narrowing certain list
criteria. One or more of the following can be used to refine the data retrieved:
Specific Rack
Specific Media Type
210
3494 Tape Library Operator Guide
Zero (0) indicates that the volume's label is readable. One (1) indicates that
the volume's label is unreadable.
List if the volume is mounted.
Zero (0) indicates that the volume is not mounted. One (1) indicates that
the volume is mounted.
List if the volume is inaccessible.
Zero (0) indicates that the volume is accessible. One (1) indicates that the
volume is inaccessible.
List if the volume was moved during Manual mode.
Zero (0) indicates that the volume was not moved during Manual mode.
One (1) indicates that the volume was moved during Manual mode.
Lists the logical volume data's expire time, if an expire time has been
defined.
Expire time is expressed in minutes (M), hours (H), days (D), or weeks
(W). If no expire time is defined, then it indicates Not Set. If the logical
volume data has already expired, then it indicates Expired.
Select this check box if the list output should include only volumes from a
particular rack. Use the associated list to select the rack to which to limit
the output. The list contains all of the racks in the 3494 Tape Library.
Select this check box if the list output should include only volumes of a
certain media type. Use the associated list to select the media type to
which to limit the output. The media type describes the physical
characteristics of the cartridge as well as the logical library with which the
volume is associated. The library sequence number is shown next to each
media type (xxxxx). Some or all of the following options are available
based on the number and type of logical libraries:
v 1 - CST (Non-VTS xxxxx)
v E - ECCST (Non-VTS xxxxx)
v J - HPCT (Non-VTS xxxxx)
v K - EHPCT (Non-VTS xxxxx)
v JA-ETC (Non-VTS xxxxx)
v JB-ETCL (Non-VTS xxxxx)
v JJ-EETC (Non-VTS xxxxx)
v JR-EEWTC (Non-VTS xxxxx)
v JW-EWTC (Non-VTS xxxxx)