Table of Contents
Advertisement
First Errorcode
Message String
The following is an example of a message string:
3494 C2444 UNSOL 15 180 A 20 6E84 *Device 180 has been made available by
the Library.
Device Category Change Notification SNMPTraps:
The Device Category Change Notification message format is:
3494 [Library Sequence Number] UNSOL 16 [Device] [Category] [Parameters]
*Device Category Change
Library Sequence Number
Device
Category
Parameters
Example:
3494 C2444 UNSOL 16 180 FF01 20 *Device Category Change
CHCK1 Library Manager SNMP Traps
This section discusses the format of the Library Manager CHECK1 messages. All
CHECK1 Library Manager SNMP Traps have the same format.
The format for CHECK1 Library Manager SNMP Traps is:
3494 [Library Sequence Number] CHCK1 [Errorcode] [Modifier] *A CHECK1 with
errorcode: [Errorcode], and modifier: [Modifier],
has occurred on [Library Sequence Number]
The following is an example of a CHECK1 Library Manager SNMP trap message:
3494 C2444 CHCK1 BDDD 230 *A CHECK1 with errorcode: BDDD, and modifier:
230, has occurred on C2444
Note: All Library Manager SNMP trap messages are actually one line of text; some
In the example, a BDDD CHECK1, with modifier 230, occurred on the C2444 tape
library .
Library Sequence Number
378
3494 Tape Library Operator Guide
Additional information, not supported currently.
The message string is one of the following:
v *Device [Device] has been made available by the library
v *Device [Device] has been made unavailable by the library
Unique Library Sequence Number of the tape library that generated the
SNMP trap message.
Device reporting the change.
Category change has been made.
Additional information, not supported currently.
have been split in order to fit on the pages of this document.
Unique Library Sequence Number of the 3494 that generated the SNMP
trap message.
Advertisement
Table of Contents
