Table of Contents
Advertisement
Figure 107. LAN Host Status Window
Host Alias
Host Name
Port
Init
Prev. Init (Previously Initialized)
186
3494 Tape Library Operator Guide
This field lists the aliases of the LAN-attached hosts. The alias for a host is
a nickname that you supply for that host. If this field is blank, no alias has
been set up for this host.
This field lists the names of all the hosts that are configured with the 3494
Tape Library through LANs.
For TCP/IP hosts, the Host Name is the Hostname defined in the TCP/IP
network. In Figure 107, rs6000.tucson.com is a TCP/IP Hostname.
For APPC and APPC/VTAM hosts, the Host Name is a combination of the
Host Network ID and the Host Location Name. For example, if the Host
Network ID is USIBMSU, and the Host Location Name is S10A4045, then
the Host Name is USIBMSU.S10A4045.
The Library Manager assigns a LAN port number to each LAN-attached
host. The LAN port number is displayed in this field as a hexadecimal
number, and service personnel use it in problem determination.
This field indicates if the LAN port is initialized:
v 0 indicates that the LAN is not initialized.
v 1 indicates that the LAN is initialized.
This field indicates if the Library Manager has been initialized previously
with this host through a LAN:
v 0 indicates that the Library Manager has not yet been initialized with
this host.
v 1 indicates that the Library Manager is initialized or was initialized
previously with this host.
Advertisement
Table of Contents
