IBM TotalStorage 3494 Tape Library Operator's Manual page 286

4. After leaving this panel and going back to the main Manage Management
Use the following buttons on this panel:
Save and Exit
Cancel
Help
To add a management class, do the following:
1. Enter a one to eight-character alphanumeric name in the Name field. The name
2. Select a Secondary Pool. If "0" is selected, a secondary copy will not be made.
3. Specify the PTP Copy Control setting. If Immediate copy is selected, the copy
4. Specify the PtP I/O VTS setting. If VTC Defined is selected, the VTC
5. Enter a short description in the Description field.
6. Select the Add/Modify button.
To modify a management class, select from the list of current management classes
presented in the list box. Use the mouse or keyboard to highlight the management
class you want to modify. Make modifications to the secondary pool, PtP copy
control, and/or description. Select the Add/Modify button.
To delete a management class, select from the list of current management classes
presented in the list box. Use the mouse or keyboard to highlight the management
class you want to delete. Select the Delete button.
Note:
260
3494 Tape Library Operator Guide
v REWIND/UNLOAD
v DEFERRED
v NO COPY
Note: The default settings are REWIND/UNLOAD for the cluster that is
attached to this Library Manager and DEFERRED for the other existing
clusters. Clusters that do NOT exist will be set to NO COPY. Setting the
Consistency Points to NO COPY for all the clusters of a VE is not valid
and will be blocked when you attempt to save the construct information
after closing this panel.
Classes panel, you will be prompted to click on the Add/Modify button in
order to save the construct information (including the Consistency Point values)
in the LM database.
Temporarily saves any changes made to the Consistency Point values for
this construct, closes this panel, and returns to the Manage Management
Classes window.
Closes this panel without saving any changes to the Consistency Point
values and returns to the Manage Management Classes window.
Display help for this panel.
must be unique within the management class construct names.
is made at the same time as the first copy. If Deferred copy is selected, the
copy is made at a time after the first copy is made. If VTC Defined is selected,
the setting is defined by the VTC. If No copy is selected, no copy will be made.
determines which VTS acts as the I/O VTS. If Dist. Library 0 is selected,
Distribution Library 0 (VTS 0) acts as the I/O VTS. If Dist. Library 1 is
selected, Distribution Library 1 (VTS 1) acts as the I/O VTS.
1. The default management class, identified by eight dashes (--------), cannot
be deleted.