Using The Digital Operator; Using The Digital Operator; Keys And Displays - YASKAWA P1000 Quick Start Manual

4.1 Using the Digital Operator

4.1

Using the Digital Operator

Use the digital operator to enter Run and Stop commands, edit parameters, and display data including fault and alarm
information.

Keys and Displays

u
No. Display
F1
1
F2
2
ESC
3
4
RUN
5
6
7
STOP
8
9
10
11
12
<1> The STOP key has highest priority. Pressing the STOP key will always cause the drive to stop the motor, even if a Run command is active at any
external Run command source. To disable the STOP key priority, set parameter o2-02 to 0.
<2> The LO/RE key can only switch between LOCAL and REMOTE when the drive is stopped. To disable the LO/RE key to prohibit switching between
LOCAL and REMOTE, set parameter o2-01 to 0.
78
1
2
3
10
Figure 4.1 Keys and Displays on the Digital Operator
Name
Function Key
(F1, F2)
ESC Key
RESET Key
RUN Key
Up Arrow Key
Down Arrow Key
<1>
STOP Key
ENTER Key
<2>
LO/RE Selection Key
RUN Light
LO/RE Light
ALM LED Light
12
ALM
DIGITAL OPERATOR
11
F1 F2
9
LO
ESC
RE
8
RESET ENTER
RUN STOP
4 5 6 7
The functions assigned to F1 and F2 vary depending on the currently displayed menu. The
name of each function appears in the lower half of the display window.
• Returns to the previous display.
• Moves the cursor one space to the left.
• Pressing and holding this button will return to the Frequency Reference display.
• Moves the cursor to the right.
• Resets the drive to clear a fault situation.
Starts the drive in LOCAL mode.
Scrolls up to display the next item, selects parameter numbers, and increments setting
values.
Scrolls down to display the previous item, selects parameter numbers, and decrements
setting values.
Stops drive operation.
• Enters parameter values and settings.
• Selects a menu item to move between displays
Switches drive control between the operator (LOCAL) and an external source (REMOTE)
for the Run command and frequency reference.
Lit while the drive is operating the motor. Refer to page
Lit while the operator is selected to run the drive (LOCAL mode). Refer to page
details.
Refer to ALARM (ALM) LED Displays on page
YASKAWA ELECTRIC TOEP YAIP1U 01B YASKAWA AC Drive - P1000 Quick Start Guide
Function
80 for details.
80.
80 for