YASKAWA P1000 Quick Start Manual page 87

Using the LO/RE Key on the Digital Operator
n
1. Turn on the power to the drive. The initial display appears.
Press . The LO/RE light will light up. The drive is now in LOCAL.
2.
To set the drive for REMOTE operation, press the
Using Input Terminals S1 through S8 to Switch between LOCAL and REMOTE
n
It is possible to switch between LOCAL and REMOTE modes using one of the digital input terminals S1 through S8 (set the
corresponding parameter H1-oo to "1").
Setting H1-oo to 1 disables the LO/RE key on the digital operator.
202 for details.
YASKAWA ELECTRIC TOEP YAIP1U 01B YASKAWA AC Drive - P1000 Quick Start Guide
4.2 The Drive, Programming, and Clock Adjustment Modes
Step
key again.
Refer to H1: Multi-Function Digital Inputs on page
Display/Result
- MODE - DRV Rdy
FREF (OPR)
U1-01= 0.00Hz
U1-02= 0.00Hz
LSEQ
U1-03= 0.00A LREF
JOG FWD FWD/REV
ALM
DIGITAL OPERATOR JVOP-180
- MODE - DRV Rdy
FREF (OPR)
U1-01= 0.00Hz
U1-02= 0.00Hz LSEQ
U1-03= 0.00 A LREF
JOG FWD FWD/REV
F1 F2
LO
ESC
RE
RESET ENTER
RUN STOP
87
4