YASKAWA P1000 Quick Start Manual page 201

No.
(Addr. Name
Hex)
F7-22
EtherNet/IP Time Scaling
(3FA)
F7-23 to
F7-32 Dynamic Output Assembly
(3FB to Parameters
374)
F7-33 to
F7-42 Dynamic Input Assembly
(375 to Parameters
37E)
<1> Parameter setting value is not reset to the default value when the drive is initialized.
<2> Cycle power for setting changes to take effect.
<3> If F7-13 is set to 0, all IP addresses (F7-01 to F7-04) must be unique.
YASKAWA ELECTRIC TOEP YAIP1U 01B YASKAWA AC Drive - P1000 Quick Start Guide
Sets the scaling factor for the time monitor in EtherNet/IP Class ID 2AH
Object.
Parameters used in Output Assembly 116. Each parameter contains a
MEMOBUS/Modbus address. The value received for Output Assembly 116
will be written to this corresponding MEMOBUS/Modbus address. A
MEMOBUS/Modbus address value of 0 means that the value received for
Output Assembly 116 will not be written to any MEMOBUS/Modbus register.
Parameters used in Input Assembly 166. Each parameter contains a
MEMOBUS/Modbus address. The value sent for Input Assembly 166 will be
read from this corresponding MEMOBUS/Modbus address. A MEMOBUS/
Modbus address value of 0 means that the value sent for Input Assembly 166
is not defined by the user, therefore the option default register value will be
returned.
Description
B.5 E: Motor Parameters
Values Page
Default: 0
Min.: -15 –
Max.: 15
Default: 0 –
Default: 0 –
201
B