Original Reading/Processing System; Removing The Contact Sensor - Canon SmartBase PC1200s Service Manual

2.3 Original Reading/Processing System

2.3.1 Removing the Contact Sensor

1) Remove the copyboard glass. (See
2.1.3)
2) Remove the 2 spacer [1].
3) Shift up the contact sensor [2], and dis-
connect the connector [3].
4) Remove the contact sensor [2].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
CHAPTER 5 MECHANICAL SYSTEM
[1]
F05-203-01
[3]
F05-203-02
[1]
[2]
5-27