Installation - Bosch DCN Next Generation Installation & User's Instructions

DCN Next Generation | Installation and User Instructions | Central Devices
11.2.2 Rear view
The rear of the audio expander (refer to figure 11.1)
contains:
4 Control inputs - Connect the audio expander to
external devices. Through the control inputs,
external devices can control the audio inputs and the
audio outputs of the audio expander (refer to section
11.4.5).
5 Audio inputs - Connect the audio expander to
external analog audio sources (refer to section
11.4.3).
6 Audio outputs - Connect the audio expander to
external analog audio devices (refer to section
11.4.4).
7 Ground screw - Connects the audio expander to
ground.
8 Optical network sockets - Connect the audio
expander to the optical network (refer to section
11.4.1).
9 Control outputs - Send the condition of the audio
expander to external devices (refer to section 11.4.6).
Bosch Security Systems | 2007-02 | 9922 141 70525
11.3

Installation

You can install the audio expander in a 19-inch rack
system or on a flat surface. Four feet and two brackets
are supplied with the audio expander (refer to figure
11.2).
figure 11.2: Installation
table 11. 1 : Physical characteristics
Dimensions (h x w x d), flat surface:
92 x 440 x 400 mm (without brackets, with feet)
Dimensions (h x w x d), 19-inch rack system:
88 x 483 x 400 mm (with brackets, without feet)
Weight:
7.0 kg (without brackets, without feet).
Note
If you install the audio expander in a 19-inch rack
system, the audio expander extends 36 mm in
front of the brackets.
en | 97