DCN Next Generation | Installation and User Instructions | Contribution Devices
15.3
Internal settings
15.3.1 Introduction
The component side of the primary PCB of the
Concentus delegate units (refer to figure 15.5) contains
solder spots. With these solder spots, you can configure
the Concentus delegate unit.
table 15. 1 : Solder spots
Solder spot
Function
S300
Restore channel function
(refer to section 15.3.2).
S302
Auto standby function
(refer to section 15.3.3).
S303
Headphones level reduction
(refer to section 15.3.4).
S300
S302
figure 15.5: Internal top view
Bosch Security Systems | 2007-02 | 9922 141 70525
S303
Remove the screws (refer figure 15.3 no. 12) to get
access to the primary PCB.
Caution
Before you open the Concentus delegate unit,
take measures to prevent electro-static
discharges.
en | 152