Bosch DCN Next Generation Installation & User's Instructions page 253

DCN Next Generation | Installation and User Instructions | Installation Devices
31 Click the front housing on the mounting block/back
housing assembly (refer to figure 45.35).
figure 45.35: Mounting the front housing
32 Insert the Torx screw into the front housing (refer to
figure 45.36).
figure 45.36: Inserting the Torx screw
Bosch Security Systems | 2007-02 | 9922 141 70525
33 Tighten the Torx screw using the Torx screwdriver
(tool 7, refer to figure 45.37).
figure 45.37: Tightening the Torx screw
34 Put the dust cap on the connector to protect the
plastic optical fibers (refer to figure 45.38).
figure 45.38: Dust cap on connector
en | 253