Bosch DCN Next Generation Installation & User's Instructions page 61

DCN Next Generation | Installation and User Instructions | Central Devices
• Video cameras (refer to the DCN Next Generation
Data Brochure for recommended video cameras).
• Allegiant video switcher with keyboard (refer to the
DCN Next Generation Data Brochure for
recommended video switchers).
• Video displays (refer to the DCN Next Generation
Data Brochure for recommended video displays).
• Central control unit.
• PC with at least one serial port.
• LBB4188 Camera Control software module.
8.9.5.3 Installation
1 Set the protocol and baudrate for serial port 1 and
serial port 2 (refer to section 8.3.2 and table 8.21).
2 Connect the serial ports of the central control unit to
the PC and the Allegiant video switcher (refer to
figure 8.27 and figure 8.28).
table 8.21: DCN-CCU to PC and AutoDome
Device Serial port
PC Port 1
Allegiant video Port 2
switcher
9 pole D-type
(male)
DCD 1
RxD 2
TxD
3
DTR 4
SG 5
DSR 6
RTS 7
CTS 8
RI 9
DCN-CCU
figure 8.27: DCN-CCU to PC
Bosch Security Systems | 2007-02 | 9922 141 70525
figure 8.28: DCN-CCU to Allegiant
Settings
3 Connect a video display to the video output of the
Protocol:
Allegiant video switcher.
Full
4 Install the licence for the LBB4188 Camera Control
Baudrate:
software module in the CCU or network controller
115.2k
Protocol: (refer to the DCN Next Generation Software
Camera control Installation Instructions).
5 Start the LBB4188 Camera Control software module
Baudrate:
(refer to the User Manual of the LBB4188 Camera
19.2k
Control software module).
6 Set the pre-positions of the video cameras with the
keyboard of the Allegiant video switcher.
9 pole D-type 7 Make sure that all pre-positions of all video cameras
(female)
are correct.
1 DCD
8 Attach the pre-positions of the video cameras to the
2 RxD
seat numbers with the LBB4188 Camera Control
3 TxD
software module.
4 DTR
5 SG
6 DSR
7 RTS
8 CTS
9 RI
PC
9 pole D-type
(male)
DCD 1
RxD 2
TxD 3
DTR 4
SG 5
DSR 6
RTS 7
CTS 8
RI 9
DCN-CCU
Note
Refer to section 8.5.8 for maximum cable
lengths.
en | 61
9 pole D-type
(male)
1 SG
2 RxD
3 TxD
4 CTS
5 RTS
6 n.c.
7 SG
8 n.c.
9 n.c.
Allegiant