Installation - Bosch DCN Next Generation Installation & User's Instructions

DCN Next Generation | Installation and User Instructions | Flush-mounted Devices
28.2.2 Top
The top of the voting unit (refer to figure 28.3) contains:
3 De-init switch - Erases the address of the voting
unit. All LEDs on the voting unit come on when the
voting unit has no address (refer to section 8.7).
4 DCN cable - Connects the voting unit to the DCN
(refer to section 28.4.1).
5 DCN socket - Makes a loop-through in the DCN
with the voting unit (refer to section 28.4.1).
figure 28.3: Top (all types)
Bosch Security Systems | 2007-02 | 9922 141 70525
3
4
5
28.2.3 Bottom
The bottom of the voting unit (refer to figure 28.4)
contains:
6 External contact plug - Connects the voting unit
to an external contact (refer to section 28.4.2).
7 Solder spot - Configures the external contact plug
(refer to section 28.4.2).
7
figure 28.4: Bottom (all types)

28.3 Installation

The voting unit is a flush-mounted device. Refer to
chapter 19 for the installation procedures.
table 28.2: Physical characteristics
Dimensions (h x w x d):
40 x 100 mm (built-in depth about 80 mm)
Weight:
250 g
You can install the voting unit in a DCN-TTH Tabletop
Housing (refer to chapter 31).
en | 194
6