Bosch DCN Next Generation Installation & User's Instructions page 93

DCN Next Generation | Installation and User Instructions | Central Devices
10.10.10Enquiry
Use the 6 Enquiry menu item to open the Enquiry
sub-menu. The menu items in this sub-menu give
general data about the network controller (refer to table
10.19).
Note
This data must be mentioned in all service
requests and failure reports.
table 10. 1 9: Enquiry sub-menu
Menu item
6A Serial Number
6B HW Version
6C FPGA1 Version
6D FPGA2 Version
6E SW Version
6F FW Version
6G MAC address
10.10.11Setup
Use the 7 Setup menu item to open the Setup
sub-menu. You can use the menu items in this
sub-menu to configure the network controller and the
system (refer to table 10.20).
Bosch Security Systems | 2007-02 | 9922 141 70525
Parameter
---
---
---
---
---
---
---
Value (read-only)
e.g. 20.0.0027E
e.g. 02.00
e.g. 01.00
e.g. 02.00
e.g. 02.00.0777
e.g. 3. 1 0. 1 560
e.g. 012345-6789AB
en | 93
Description
The hexadecimal serial
number of the network
controller.
The version number of the
hardware of the network
controller.
The version number of the
MIF FPGA firmware of the
network controller.
The version number of the
MMU FPGA firmware of
the network controller.
The version number of the
software of the network
controller.
The version number of the
firmware of the network
controller.
The MAC address of the
network adaptor