Bosch DCN Next Generation Installation & User's Instructions page 94

DCN Next Generation | Installation and User Instructions | Central Devices
table 10.20: Setup sub-menu (* = default)
Menu item
7A Mic. Priority
7B Att. Tones
7C Request LED
7D Floor Distr.
7E Intercom ...
7F Del. Display
7G Routing I/O 4
7H Level
7I Camera Cntrl
7J TCP/IP
7K Unit Name
7L Defaults ...
Bosch Security Systems | 2007-02 | 9922 141 70525
Parameter Value
--- Temporarily off*
Permanently off
Event: Chime:
Priority* Off, 1*, 2, 3
Voting Off*, 1, 2, 3
Led setting Flashing*, Continuously
lit
--- On*, Off
--- ---
--- Language:
English*
German
French
Italian
Dutch
Spanish
--- Mode:
Floor*
Mix-minus
Insertion
Signal: Level:
Input 3* -6 to 6 dB (0 dB*)
Input 4 -6 to 6 dB (0 dB*)
Output 1 -24 to 6 dB (0 dB*)
Output 2 -24 to 6 dB (0 dB*)
Output 3 -24 to 6 dB (0 dB*)
Output 4 -24 to 6 dB (0 dB*)
Baudrate Baudrate:
9.6k
19.2k*
57.6k
115.2k
--- ---
--- Name:
CCU*
Custom name
--- ---
Description
The action taken by the system when the
chairman releases the priority button (refer
to section 8.8.4).
The attention chimes of the system (refer to
section 8.8.3).
Sets the behaviour of the request LED for
the first delegate in the request list.
Enables or disables floor distribution (refer
to section 8.8.5).
Gives access to the Intercom sub-menu
(refer to section 10. 1 0. 1 2).
The language that is used by the displays of
the contribution devices. Other languages
(e.g. Chinese) can be downloaded to the
network controller, but will overwrite the
default languages. The English language
cannot be overwritten.
Changes the audio routing of output 4
The nominal levels of the audio inputs and
the audio outputs of the network controller.
Sets the baudrate for the camera control
(refer to section 10.9).
Gives access to the TCP/IP submenus
(refer to section 10. 1 0. 1 3).
The name of the network controller (max. 16
characters).
Gives access to the Reset menu item (refer
to section 10. 1 0. 1 4)
en | 94